Making Cents of Copper: How Much Do You Know?

Latest Post

Making Cents of Copper: How Much Do You Know?

It was the first metal to be smelted from ore (around 5000 BC), the first metal to be cast into a mold (4000 BC), and the first metal to be alloyed (with tin, around 3500 BC). It’s copper, and it has a multitude of current applications.

But how much do you know about it? Let’s find out…

BlogImages/copper2.jpg

Take Our Copper Quiz to Test Your Knowledge of Cu


It was the first metal to be smelted from ore (around 5000 BC), the first metal to be cast into a mold (4000 BC), and the first metal to be alloyed (with tin, around 3500 BC). It’s copper, and it has a multitude of current applications.

But how much do you know about it? Let’s find out…

statue of liberty 30508 960 720 300x610#1. How much copper was used in constructing the Statue of Liberty?

A. 62,000 lbs.
B. 179,000 lbs.
C. 200,000 lbs.
D. 20,000 lbs.
E. No one really knows


There have been a plethora of numbers thrown around throughout the years, and they run the gamut. According to the Copper Development Association, the copper content of the lady is 179,000 pounds. But the National Parks Service lists the figure as 62,000 pounds. So which is it?

Apparently, Barry Marino, Ellis Island’s official librarian, set the record straight a few years back. “About 200,000 pounds, or 100 tons, of copper was used in the construction of the Statue of Liberty,” Marino explained. “Discrepancies exist because this amount was announced in the 1880s from French sources….However, the approximately 200,000 pounds is an estimate based on engineering calculations.”

So if you guessed C, give yourself a gold star.

#2. Which country produces the most Cu?

question mark 2153518 960 720 563x375A. China
B. Chile
C. Peru
D. The United States
E. Russia


The answer is B. Chile is the world’s leading copper producer by far. The country produced an estimated 5.8 million metric tons of the stuff in 2017. In second place is Peru, with an estimated mine production of 2.4 million metric tons in 2017. Next comes China, followed by the United States.

#3. Which U.S. copper mine is the most productive?

Bingham Canyon Mine 2018A. Bingham Canyon Mine, Utah
B. El Chino Mine, New Mexico
C. Eagle Mine, Michigan
D. Morenci Mine, Arizona
E. Mesabi Mine, Minnesota

The Morenci mine in Arizona is the largest producer of copper in North America, so the answer is D. Operated by Freeport McMoRan, the mine opened for operation in 1872. In 2017, it produced 737 million pounds of Cu.

The following video explores another Arizona copper mine–the Resolution Mine. It’s one of the deepest in North America and the first to employ a most unusual mining technique:

 

 

 

 



The Bingham Canyon Mine suffered the “largest non-volcanic landslide in history” in 2012, according to Mining.com, but rebuilt in 18 months and is again producing 560,000 pounds per year.

(If you chose E, you get 20 lashes with a wet noodle — Mesabi is an iron range.)

#4. How much of the current U.S. penny is actually copper?

Penny 1A. 10 percent
B. 30 percent
C. 50 percent
D. 2.5 percent
E. 100 percent


According to the U.S. Mint, the first U.S. pennies were all pure copper. Then in 1857, the Mint added nickel to the copper, but switched to tin and zinc in 1864.

During World War II, copper was needed for the war effort, so pennies were made from zinc-coated steel. In 1962, tin was eliminated. And in 1982, the penny became primarily zinc with only 2.5% copper.

The answer is D. (By the way, other U.S. coins today consist of a solid copper core and layer of copper-nickel alloy.)

#5. What is the only metal with higher conductivity than Cu?

plasma ball 172948 960 720A. Silver
B. Aluminum
C. Gold
D. Zinc
E. Brass

Silver has the highest electrical conductivity of all metals. (The answer is A.) However, silver’s cost prevents it from being economically viable for broad-scale electrical uses. Among non-precious metals, Cu conductivity is the highest, and has become the ultimate standard.

This standard of conductivity is called the International Annealed Copper Standard, or IACS. The percentage of IACS of a substance refers to its electrical conductivity, with pure copper’s IACS percentage being 100 percent. In contrast, the conductivity of aluminum ranks at 61 percent IACS, gold is 76 percent, and zinc is 27 percent. (Brass is a Cu alloy, not a pure metal.)

 

 

 

–Quiz Continues Below–

 green copper infographic

#6. About 25% of Americans do not consume enough Cu. Which of the following is not a symptom of copper deficiency?

gray hair 1 1 300x339A. Weakness and fatigue
B. Premature gray hair
C. Difficulty Walking
D. Rash or hives
E. Memory problems


Copper is among the small group of metallic elements which are essential to human health. The adult recommended daily allowance (RDA) is around 900 micrograms (mcg) a day, which must be supplied by diet. (Our bodies can’t synthesize it.)

When copper levels are low, iron deficiency can occur, resulting in weakness and fatigue. Deficiency can also affect melanin formation (causing premature gray hair), as well as spinal cord health, resulting in difficulty walking. A disruption of brain function and development can also occur, causing memory problems.

Other symptoms of copper deficiency include frequent illness, brittle bones, pale skin, sensitivity to cold and vision loss. It does not cause hives or rash, so the answer is D.

Table clock German school 17th century golt bronze and brass   Museo Nacional de Artes Decorativas   Madrid Spain   DSC08031 1 300x577#7. Copper is easily alloyed with other metals. How many Cu alloys are there?

A. About 250
B. About 570
C. About 80
D. About 400
E. Too many to count

The global standards organization ASTM International currently lists more than 570 copper-based alloys, so the answer is B.

Brasses and bronzes are probably the most well-known of these alloys. Brasses are mainly copper and zinc. Bronzes are mainly copper and tin, aluminum, silicon or beryllium.

Because of its ease of manufacture, machining and corrosion resistance, as early as the 17th century, brass became the standard alloy used to make all accurate instruments such as clocks, watches and navigational aids.

And did you know that bronze is even harder than pure iron? It’s also far more resistant to corrosion.

#8. Of all the copper ever mined, how much is still being used today?

copper 1504174 960 720A. 80%
B. 65%
C. 100%
D. 25%
E. 40%

Believe it or not, 80% of all the Cu that’s ever been produced is still in use today. (So the answer is A.) No wonder it’s been called “man’s eternal metal” — it’s extremely durable and long-lasting.

It’s also 100% recyclable, and can continue to be recycled without any changes to its original properties. In fact, recycled copper retains 95% of its original value, contributing significantly to the world’s supply and making this red metal one of the most “green.”

How’d You Do?

If you answered at least five of these questions correctly, you’re a copper expert, which means you get a bronze star. (You weren’t really expecting gold, were you?)

Sources:

Copper Development Association

Investing News Network

U.S. Mint

Sciencing

Healthline

My company has been using lockboxes from McShane Welding for over 6 years now and is very pleased with the product and customer service. The personnel are all friendly and go above and beyond. The boxes are great quality and our clients love them. We couldn’t be more pleased with our working relationship with McShane.

Autumn Simpson

Representative of a nationwide network of local laboratories

Our courier company strongly encourages the use of LabLockers. We have been a customer for over 10 years and no other metal box vendor we tried in the past compares to the quality and customer service we get at McShane. Any business in the courier industry, specifically medical samples, should consider LabLockers.

Rob Johnstone

Priority Express

Our laboratory has been very satisfied with our choice to purchase the ESC-10 for specimen collection and transportation. This product allows us to control the temperature of the sample by offering frozen and ambient storage solutions. McShane Metal Products have always delivered their products on time while consistently offering fair pricing.

Lazer Schlussel

McShane Metal Products, Welding & Fabrication

12 Port Access Road
Erie, PA 16507

Phone: 1 (800) 735-3632

Fax: (814) 452-3013

info@mcshanewelding.com